top of page

File format: .stl, the CyberHanger 3D model works with all 3D printers
Recommended filament: PLA, ABS and others
Recommended printer settings: 15%-20% infill volume with 2 shells, no supports
Print orientation: Laying down on its side, see picture below
Recommended wall mounting: 2 x Wood screws or 2 x Screws with wall plugs for concrete, plaster or brick walls
CyberHanger Size: 120 x 100 x 15 mm , 4.7 x 4 x 0.6 inch
Screw hole diameter(x2): 4.5 mm , 0.2 inch

Correct print orientation with the CyberHanger on its side on the 3D printer's build platform
bottom of page